Canned Motor Pumps

Reverse Circulation Pump

Reverse Circulation Pump

The pumps are designed for fluids with relatively high vapour pressure, low specific gravity, low specific heat liquids. Liquids with steep vapour pressure curves may vapourize on picking up the motor heat and result in cavitation conditions & vapour locking. The circulation/pumping fluid is passed from the casing volute chamber into the rotor chamber through the front bearing housing. After being extracted from the outlet of rear bearing housing, the liquid is returned to vapour zone in the suction tank, through the reverse circulation line.
Suitable for volatile liquids, liquefied gases & refrigerants such as ammonia and synthetic fluro and chloro hydro carbons.

Pioneer in the canned motor pump design and manufacturing with an experience of over 25 years.

Contact Center

Add. : S.NO. 18, H.NO. 3,4 & 5 Off Village Ghodbunder, Near R.T.O Office, Mira Bhayander Road, Mira Road (East) - 401107, India.

Contact us : +91-22-50592300

Email :